INSTALL password op

Function

Install or remove software options available to Adept systems.

Usage Considerations

You must have received the authorization password from Adept. INSTALL can be run only on CPU #1 in multiple CPU systems.

Parameter s

password A 15-character string assigned by Adept.

op Optional integer indicating the desired operation:

0 = install option (default)
1 = remove option

Details

When you purchase additional software options from Adept, the software is delivered with a software license and authorization password that enables the software for a particular controller. If the option is not enabled, the software will not load correctly.

The password is keyed both to the software option and the serial number of your controller. The password cannot be used on any controller other than the one for which you purchased the software option.

NOTE: If you replace the SIO module in your controller, you must reinstall the software options. Execute INSTALL for each system option after the new SIO has been installed.

Example

If you purchased the AIM MotionWare software from Adept and the password provided with the option is 4EX5-23GH8-AY3F, the following instruction will enable the software option:

INSTALL 4EX5-23GH8-AY3F 

NOTE: Some options, such as AIM software, have additional software disks that must be copied to the hard drive. Other options, such as AdeptVision VXL, are already resident and need only to be enabled.

Syntax

INT.EVENT-I