Loading the SPEC Program

  1. Insert the Adept Utility disk containing SPEC.V2 into drive A. (Alternatively, if the up-to-date version of the SPEC program has been installed onto your hard disk, you may load it from there. The suggested directory to install utility programs is C:\UTIL\)

  2. Load the utility program into system memory and start execution of the program with the commands

load a:spec
execute 1 a.spec

  1. Follow the prompts provided by the program (see the following sections).

NOTE: If you want to exit the program at any prompt, you can enter ^Z (that is, hold down the Ctrl key and press "Z").

  1. When complete, you can clear the program from memory with the following commands:

kill 1
delete a.spec